Eurokeder is a high-quality keder product being used across the Americas and by the main clearspan manufacturers in Europe.
Keder is a rope edge, made from a fabric surrounding a flexible core. The keder fabric is coated on the inside only. Secondly, The keder welds to regular PVC-coated fabricsĀ where the outside of the keder fabric is uncoated, exposing the polyester yarns. Thus, exposing the yarns allows the keder to slide better in aluminum keder extrusions compared to coated fabrics sliding into the extrusion.
Review the Catalog for our sizes, styles, and colors.
Four Distinct Advantages
The main advantage of this specific keder for use in fabric structures is the continuous connection it allows between a piece of fabric and a frame. Subsequently, this allows for a faster install, a safer install, and a better load distribution when comparing it with other methods. Therefore, this adds 4 distinct advantages to the product.
Strength in Weaves
2200 Dtex (2000 Denier) yarns compared to 1100 Dtex for most keders. As a result, a thicker yarn means less wear, higher strength, and better sliding.
Accuracy is Key
RF welded. Radiofrequency (or HF High Frequency) welded keder has better accuracy. Importantly, the accuracy and consistency of the distance between the core and the edge of the fabric are important to create tighter clearspan panels providing wind resistance. Better straightness improves efficiency in fabrication.
Weave Options
Plain weave: the use of the thicker yarn allows the use of plain weave, which results in a tighter weave. Many people find the plain weave less susceptible to fraying compared to the panama weave which is commonly used to create higher strengths and yarn counts with 1100 Dtex (1000 Denier) keder.
Coating Options
Unique products that distinguish themselves from other products in the market with quality and styles including double-coated keder.
Eurokeder Catalog
When placing an order or request please reference the keder style number.
The following types of keder are currently in our inventory:
Keder rope (also called keder cord, awning rope, and sail rope) is a flexible round PVC extrusion designed to allow you to make your rope edge built into a fabric panel.
We sell keder cord by the roll in 7mm, 10mm, and 12mm diameter. Therefore, when ordering, be aware that the fabric will add approximately 1mm to the overall diameter.
Other sizes may occasionally become available, please contact us for additional sizes.
Check out our Literature section for a standard list of our inventory and other products we offer, including keder extrusions, sewing, and single and double flag keder.